MULTI TV RE-SCAN PROCEDURES

SYNDICATED

MULTI TV HD II/ HD PLUS

1. PRESS THE MENU KEY ON THE REMOTE CONTROLL.

2. PRESS THE SIDE POSITIVE VOLUME KEY >+TO SELECT INSTALLATION AND PRESS OK.

3. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-)TO SELECT MANUAL SEARCHAND PRESS OK

4. SCROLL DOWN TO SELECT SYMBOL RATE

5. USE THE NUMBERS ON THE REMOTE CONTROLL TO ENTER SYMBOL RATE NUMBER 30000

6. PRESS THE BLUE KEY ON THE REMOTE CONTROLL TO SCAN OR TO SEARCH.

7. 10. PRESS EXIT ON THE REMOTE CONTROLL TO EXIT TO START WATCHING YOUR CHANNELS

DIGITAL COMBO DECODER VI/COMBO DECODER T2/S2

1. PRESS THE MENU KEY ON THE REMOTE CONTROLL.

2. PRESS THE SIDE VOLUME KEY >+ TO SELECT INSTALLATION AND PRESS OK.

3. USE CHANNEL KEY UP AND DOWN(CH+/CH-) TO SELECT OR HIGHLIGHT SATELLITE SETUP AND PRESS OK

4. SCROLL DOWN BY USING THE DOWN CHANNEL KEY (CH-)TO SELECT MANUAL SEARCHAND PRESS OK

5. SCROLL DOWN TO SELECT SYMBOL RATE

6.  USE THE NUMBERS ON THE REMOTE CONTROLL TO ENTER SYMBOL RATE NUMBER30000

7.PRESS THE BLUE KEY ON THE REMOTE CONTROLL TO SCAN OR TO START SEARCH.

8. AFTER SERCHING, PRESS EXIT ON THE REMOTE CONTROLL TO EXIT TO START WATCHING YOUR CHANNELS.

CA PLUS SERIES 2/SC 101 S2/MULTI TV HD

1. PRESS MENU ON THE REMOTE CONTROL AND PRESS THE POSITIVE VOLUME KEY(>+)TO SELLECT INSTALLATION

2. SELLECT OR HIGHLIGHT DISH SETTINGS BY USING CHANNEL  UP AND DOWN KEY (CH-/CH+) AND PRESS OK

3. ENTER THE DEFAULT PASSWORD (0000) TO OPEN

4. PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN

5. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER30000

6.SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE

7. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN

8. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY

(CH-/CH+)

9. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL

10. PRESS CHANNEL UP AND DOWN KEY TO SCROLL TO START SEARCH AND PRESS OK TO SCAN. 

11. PRESS MENU OR EXIT, A PAGE WILL DISPLAY

12. PRESS NEGATIVE VOLUME KEY (-<) TO SELECT YES AND PRESS OK TO SAVE.

QC-XPLUS SERIES II/QC-XPLUS SEREIS IV/QC 001 CD Cas

1. PRESS MENU ON THE REMOTE CONTROLL AND PRESS THE POSITIVE VOLUME KEY (>+)TO SELLECT INSTALLATION

2. SCROLL UP AND DOWN TO HIGHLIGHT DVB-S AND PRESS OK

3. ENTER DEFAULT PASSWORD (0000) TO OPEN.

4. SCROLL UP AND DOWN TO HIGHLIGHT DISH SETTING AND PRESS OK

5.PRESS THE YELLOW KEY (Edit TP) ON THE REMOTE A PAGE WILL OPEN

6. SCROLL DOWN TO SYMBOL RATE AND ENTER THE SYMBOL RATE NUMBER 30000

7. SCROLL DOWN TO SELECT YES AND PRESS OK TO SAVE

8. SCROLL DOWN TO SELECT SERVIC SEARCH AND PRESS OK A PAGE WILL OPEN

9. SCROLL UP AND DOWN TO HIGHLIGHT SEARCH MODE BY USING CHANNEL UP AND DOWN KEY

(CH-/CH+)

10. PRESS POSITVE VOLUME KEY >+ TO CHANGE FROM AUTO TO MANUAL

11. PRESS CHANNEL UP AND DOWN KEY TO SCROLL TO START SEARCH AND PRESS OK TO SCAN.

12. PRESS MENU OR EXIT, A PAGE WILL DISPLAY

13. PRESS NEGATIVE VOLUME KEY (-<) TO SELECT YES AND PRESS OK TO SAVE.

SOMOTEX (MTV-1722)

1.            Go to menu

2.            Scroll down to installation (press ok)

3.            Scroll down to manual scan (press ok)

4.            Select symbol rate under manual scan

5.            Enter the symbol rate 30000

6.            Press the green button on the remote control to start channel search

7.            Press “exit” or “ok” to view

1.  

 

However, additionally, Multi TV is organising a Mobile Clinic to assist viewers who have lost their Multi TV signal after the upgrade.

Viewers can visit the following locations for assistance every weekend in June 2016.

Details in image below: